The shaper machine is commonly used to produce flat surface, grooves, slots etc. The work piece is hold by a adjustable tool post in shaper machine. A single point cutting tool is in reciprocating motion rub the work piece and cut unwanted metal from it in form of chips. It consist many important parts which take care of it proper working. These are ram, table, clapper box, tool head, column, cross Rail, stroke Adjustment, table supports, base etc. Shaper machine works on the quick return single crank mechanism which provides the tool reciprocating motion.
| Model |
BC 6063 |
| Maximum cutting length(mm) |
630 |
| Max.range of the horizontal movement of the table |
630 |
| Max.distance between the ram bottom and table |
385 |
| Max.length of the vertical movement of table |
360 |
| Dimensions of table top(L×W) |
630X400 |
| Max.stroke length of the toolhead |
120 |
| Max.swivel angle of the toolhead |
±60° |
| Max.section of tool(W×T)(mm) |
20×30 |
| Number of ram reciprocation per minute |
14-80 |
| Range of table feed: horizontal |
0.4-5.0 |
| Vertical |
0.08-1.00 |
| Width of the T-slot for center positioning(mm) |
18 |
| Power of the main motor |
3 |
| N.W/G.W(kg) |
1750/1870 |
| Overall dimensions(L×W×H)(mm) |
2342×1225×1480 |
| Model |
BC 6063 |
| Maximum cutting length(mm) |
630 |
| Max.range of the horizontal movement of the table |
630 |
| Max.distance between the ram bottom and table |
385 |
| Max.length of the vertical movement of table |
360 |
| Dimensions of table top(L×W) |
630X400 |
| Max.stroke length of the toolhead |
120 |
| Max.swivel angle of the toolhead |
±60° |
| Max.section of tool(W×T)(mm) |
20×30 |
| Number of ram reciprocation per minute |
14-80 |
| Range of table feed: horizontal |
0.4-5.0 |
| Vertical |
0.08-1.00 |
| Width of the T-slot for center positioning(mm) |
18 |
| Power of the main motor |
3 |
| N.W/G.W(kg) |
1750/1870 |
| Overall dimensions(L×W×H)(mm) |
2342×1225×1480 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}