Model: PSJ400
The plastic waste such as film, silk, woven bags, etc. to the pellet machine; According to the filling degree of the crushing cylinder, the feed speed of the conveyor belt is completely automatic. It is controlled by the aggregate motor flow.
1. Ring PVC conveyor belt with T-tooth, acid and alkali resistant 2.Conveyor belt width: 400mm 3. Conveying distance: 4500mm 4.Motor power: 1.5kw
Variable frequency speed regulation With moving roller With belt tensioner With receiving hopper.
The rotating blade of the pellet machine cuts off the incoming material to achieve the crushing effect. The friction heat rise caused by the high-speed rotating blade will heat the material and ensure that the material shrinks before the melting point. The optimized design of the diversion structure can effectively press the material and feed it directly into the extruder screw, while the wall of the pellet machine cylinder blocks the backflowing material. Integrated crushing, drying and compaction to ensure yield.
1.cylinder wall material: 304 2.Break and lump the material 3.hydraulic open cover hydraulic lift power from the hydraulic station 4.Base water cooling (with water cooling system)
Technical parameters: crushing cylinder volume: 300L
1. crushing cylinder diameter: 720mm 2.Drive motor power: 37KW AC 1500rpm 3.Frequency conversion control Reduce the speed when producing hard sheet material to facilitate feeding 4.Knife: 2 sets of 4 blades Material: SHH Fixed blade: 13 blades Material: SHH Includes visual hatch and flashlight
Material temperature control device: thermocouple Temperature control breaks off and automatic modes have an overtemperature alarm system.
Single screw extruder performance characteristics:
1.barrel and screw material: 38CrMoAlA, nitriding treatment, nitriding layer depth ≥0.6mm, with high strength, high wear resistance, corrosion resistance 2. barrel, screw structure: isometric gradual change type screw, barrel axial opening spiral groove 3.Gearbox equipped with high-strength thrust bearing, high torque output.
Technical parameters:1.Screw diameter: Φ85mm 2.screw length-diameter ratio: 31:1 3.compression ratio is about 2.5 4. Screw speed 0-110rpm
5. Drive motor power: 55KW AC 1500rpm 6.Frequency converter speed regulation 7.reducer: hard gear reducer with gear pump lubrication system, circulating water cooling system, reducer high torque, low noise. 8.cylinder heating power: 5×5KW (cast aluminum heater with stainless steel cover)
9. Lubrication method: forced lubrication 10.Transition zone :3.5kw ceramic heater
Vacuum exhauster Performance characteristics: 1.Vacuum pump exhaust, single filter Technical parameters: 1.Exhaust rate: 1.2 m3/min 2.Motor power: 3kw
Water consumption: 8.5L /min.
The die body adopts 40Cr forging The surface of the runner is nitrided and polished Fully automatic hydraulic control 1.Diameter and quantity of mesh board: Φ200mmx2 2.Heating power: 8.6KW 1 pressure sensor 1 audible and visual alarm lamp Hydraulic station: 3kw Energy storage tank: 10L tubing 1 bracket 2 The screen changer adopts the patented technology of pressure-driven rigid seal to prevent leakage and extend service life. The sealing interval can be automatically compensated with the use process to meet the high temperature and high pressure production.
1.barrel and screw material: 38CrMoAlA, nitriding treatment, nitriding layer depth ≥0.6mm, with high strength, high wear resistance, corrosion resistance 2. barrel, screw structure: isometric gradual change type screw, barrel axial opening spiral groove 3.Gearbox equipped with high-strength thrust bearing, high torque output.
Technical parameters:1.Screw diameter: Φ85mm 2.screw length-diameter ratio: 31:1 3.compression ratio is about 2.5 4. Screw speed 0-110rpm
5. Drive motor power: 55KW AC 1500rpm 6.Frequency converter speed regulation 7.reducer: hard gear reducer with gear pump lubrication system, circulating water cooling system, reducer high torque, low noise. 8.cylinder heating power: 5×5KW (cast aluminum heater with stainless steel cover)
9. Lubrication method: forced lubrication 10.Transition zone :3.5kw ceramic heater
Vacuum exhauster Performance characteristics: 1.Vacuum pump exhaust, single filter Technical parameters: 1.Exhaust rate: 1.2 m3/min 2.Motor power: 3kw
Water consumption: 8.5L /min.
The die body adopts 40Cr forging The surface of the runner is nitrided and polished Fully automatic hydraulic control 1.Diameter and quantity of mesh board: Φ200mmx2 2.Heating power: 8.6KW 1 pressure sensor 1 audible and visual alarm lamp Hydraulic station: 3kw Energy storage tank: 10L tubing 1 bracket 2 The screen changer adopts the patented technology of pressure-driven rigid seal to prevent leakage and extend service life. The sealing interval can be automatically compensated with the use process to meet the high temperature and high pressure production.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}