| Type: | Horizontal Lathe |
|---|---|
| Processing Accessory: | Centre CNC Lathe |
| Guide Rail: | Horizontal Guide Rail |
| Tool Holder: | Double-tool Holder CNC Lathe |
| Power Source: | Electric |
| Controlling Mode: | CNC |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Composition and function of CA6140 common horizontal lathe
(1) spindle box. It is fixed on the left end of the machine body, the spindle installed in the spindle box (spindle is hollow, not only can be used for longer bar processing and machine tool wiring, but also can increase the rigidity of the spindle), clamping workpiece by clamping plate and other fixtures. The function of the spindle box is to support and drive the main shaft, so that the main axis drives the workpiece to rotate at the specified speed.
(2) saddle and tool rest. It is located in the middle of the bed, and can move longitudinally along the tool track of the bed. The tool rest is located on the bed saddle, and its function is to clamp the lathe tool and make the lathe tool move vertically, transversely or obliquely.
(3) lathe bed. The bed is fixed on the left leg and the right leg. The lathe bed is the basic support of the machine tool. The main parts of the machine tool are mounted on the bed, and the bed keeps them in exact relative position at work
| Product model | CA6140A | |
| Swing Over Bed | 400mm | |
| Swivel diameter on tool holder | 210mm | |
| Effective diameter of gyration diameter in saddle | - | |
| Maximum workpiece length / maximum turning length | 750/650mm; 1000/900mm; 1500/1400mm; 2000/1900mm |
|
| Distance from spindle center to bed plane guide rail | 205mm | |
| Spindle bore / taper of spindle bore | Φ 52 mm /1:20 | |
| Spindle speed series | 24/12. | |
| Spindle speed range | 50Hz: 11-1600r/min 60Hz: 13.2-1920r/min |
|
| 50Hz: 14-1580r/min 60Hz: 20.4-1896r/min |
||
| Longitudinal feed range (64) | Standard feed: : 0.08-1.59mm/r Small feed : 0.028-0.054mm/r Increase feed : 1.71-6.33mm/r |
|
| Transverse feed range (64) | Standard feed : 0.04-0.79mm/r Small feed : 0.014-0.027mm/r Increase feed: 0.86-3.16mm/r |
|
| Longitudinal / lateral quick moving speed of tool holder | Vertica : 4m/min Horizontal: 2m/min |
|
| Machining thread range | Metric thread 44 : 1-192mm; British thread 21 : 2-24 Diameter pitch thread 37: 1-96 |
|
| Maximum travel of upper / lower turret | 140mm/320mm | |
| Swivel angle of turret | ± 90 o | |
| Distance between spindle centerline and tool support | 26mm | |
| Cutter bar section size | 25mm×25mm | |
| Spindle diameter, stroke and taper of spindle hole | 75mm×150mm; Morse taper 5 |
|
| Screw pitch | 12 mm | |
| Main motor power | 7.5KW | |
| Main engine net weight kg (approx.) | 750 mm | 2000 |
| 1000 mm | 2080 | |
| 1500mm | 2230 | |
| 2000mm | 2580 | |
| Host outline size (x * width * height) mm | 750mm | 2418×1000×1267 |
| 1000mm | 2668×1000×1267 | |
| 1500mm | 3168×1000×1267 | |
| 2000mm | 3668×1000×1267 | |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}